|
different IP address, such as 192.168.100.10. Now you can operate and Image-
clone clones, which are public cultivating in Section 4. Consider the four basic
operations. 5.1. Creating a replacement / backup clone notebook After loading
notebook (NB) and the PC to boot Peer-to-Peer Network Boot discount chains, in
the NB and PC from PS-DOS starts Norton Ghost 2003. On the PC must make the
following sequence of steps : Peer> TCP / IP> Slave> Attempting to connect via
TCP / IP (1) Use IP Address 192.168.100.9 in master to connect to the slave
machine A laptop to ask steps : Peer> TCP / IP> Master> Note : Before attempting
the operation (2) make sure that the Ghost TCP / IP Slave Client is running!
Local IP address : 192.168.100.10> 192.168.100.9> OK Once introduced us
192.168.100.9, and the relationship between NB PC is established and can be set
cloning. If you want to create a clone laptop CLT0 (See Figure), the NB (Master),
the following actions : Disk> Disk To> Source Select local drive by clicking on
the drive number> 1> OK> Select remote destination drive by clicking on the
drive number> 1, 2> OK> Destination Drive Details> / * display of old and new
dimensions drive. Users can create new dimensions or keep old * > OK> Proceed
with disk clone? Destination Drive will be overwritten> Yes, No 5.2. Creating a
replacement / backup Image- clone notebook If we want to create a backup or
replacement Im0 ImTi updated with intervals scrap Ti, compressed Image- clone
notebook (See ris.3-5), after the installation of communication between NB PC
and determined action (1), (2) at laptop (Master) should ask steps : Disk> To I
number> 1> OK> Remote file name of image> A :, C :, D :, E :, F :, G : / * In
this example, Section G : is the only section of additional disk drive HDD2
inserted in Mobile Rack PC. Tentatively Section G : a folder in the mage> Select
local Source drive by clicking on the drive (3), which will be available
replacement Image- clone Im0 * > Im0> File E magazine surveyed in Russia "http :
/ / zhurnal.ape.relarn.ru/articles/2004/089.pdf 10 04 name : Im0> Compress image
file? No, Fast, High> Proceed with Image File Creation? > Yes, No 5.3.
Installation At the beginning of a link between the NB and PC. Prichemkompyuter-Master.
This after loading NB and for the PC with rk Boot disks, NB be made following
sequence of actions : Peer> TCP / IP> Slave> Attempting to connect via TCP / IP
Use C ask steps : Peer> TCP / I make sure that the IP address : 192.168.100.10>
192.168.100.10> OK Clone, for example Further action could be instayuschie
deyllyatsii did : because the at PC set sledust Disk> Disk To> Source Select
local drive by clicking on the drive number> 1, 2> OK> Select remote destination
drive drive number> 1> OK> Destination Drive Details> / * display light out of
the old and new dimensions of the disk. Users can create new dimensions or keep
old * > OK> Proceed with disk clone? Destination Drive will be overwritten> Yes,
No 5.4. At the beginning of a link between the NB and PC. And noutbu, computer-Slave.
This after loading NB and PC with zagruzoch rk Boot disks, perform actions (1),
(2). Further laptop (Master), it is necessary to ask steps : Disk> From Image>
Remote image file name to restore from> A :, C :, D :, E :, F :, G :> Im
destination drive by clicking on the drive number> 1> OK> Destination Drive
Details> / * display of old and new dimensions of the disk. Users can create new
|
OwlCom
Software
